|
|
| |
|
|
 |
| Door sensor-12 Instruction |
|
|
 |
|
|
|
|
ALL Instructions |
| |
Adobe Reader |
| |
DESCRIPTION
Save power design, low power indicated, It is widely used for monitoring and security
system, with high reliability, small size, easy installation and operation and strong flexibility.
It is including one transmitter part and two small magnetic parts, when the door or
window is open, it will be triggered and immediately sends out wireless signal to main
alarm system to warning. Installing place: door, window, draw, cabinet and so on.
SPECIFICATION:
1. Triggered distance :<2~2.5cm
2. Working voltage：12V DC, with dry battery model:23A . Low battery voltage about 8V.
3. Working current：≤10mA
4. Static current：≤5μA
5. Working frequency：433.92 MHZ±2KHZ or 315 MHZ
6. Transmitting distance：noninterference ≥200m
7. Emitting frequency：>10mw
8. Frequency tolerance：±0.2MHz
9. Operating temperature: indoor -10 ~ 50℃, related humidity ≤ 95%
10. Power: standby :0.01W, Alarm :0.09W
11. Size: Transmitter part: 90 mm(L)×55 mm(W)×22 mm(H)
Magnetic part(outdoor type): 27 mm×14 mm×7.6 mm Weight: 50g
INSTALLATION
1. You should fix the transmitter part on the doorcase, magnetic part on the
motion door separately by adhesive, The Led of the transmitter part should near to the
magnetic part.
2. The distance between two the magnetic parts should be no more than 2cm.
3. It means OK if the Signal LED flashes for 1 second after installation.
4. The signal red LED flash for 1 second to alarm,The low battery green LED
lights all along which means batter power is not enough. Please replace the same size
new battery
5. Antenna is suggested to pull out.
|
|
|
