|
|
| |
|
|
 |
| Strobe light-35 Instruction |
|
|
 |
|
|
|
|
ALL Instructions |
| |
Adobe Reader |
| |
New,wireless flashing siren(siren with strobe light), it can make as an alarm/receiver/
compatible with DIY alarm panel, add the needle jump, the option of built-in lithium
rechargeable battery inside the board, and now strong launch!
FEATURES:
A). DIY, Wireless installation, Easy-to-operated. Auto-alarm.
B). It goes off alarm to scar away the intruders when transmitter is triggered.
APPLICATIONS:
a). Integrated with outdoor field, home, farm, business store, public plaza security
b). Widely used for residential area, office, workshop, school, factory, museum, Hospital.
c). Widely used for bank, electric power Dept. Oil Dept,Railway Dept. financial Dept.
Police Dept and so on
SPECIFICATION:
1. Working voltage: input: 110 VAC or 240VAC , Output :9VDC
2. Siren index: 95 dB (Test distance: 300mm, Surrounding noise:≤65db, standard voltage)
3, Sound frequency: 3.8KH2+10％; Resistance:230-280mA
4, Wireless frequency :433 MHz OR 315 MHz. Transmit speed: 3H2±10％
5. Transmitting distance：noninterference ≥200m ; indoor about 30~50 m
INSTALLEMENT AND OPERATION:
1.Working method:DIY,It is a receiver to receive wireless sensor Synchronously (optional
to work with alarm panel). Sound index: 95db,operation voltage:9~12 VDC. transmitting
distance ≤180m in open area,indoor for 30~80m; Now we have put two model NO.. The
frequently use is Model NO.ATS-35.Now we make another one ATS-35B is directly to receive
wireless signal form most other alarm panel Synchronously.It is using different chip and
has set up the address code so the alarm panel can program it easily. Such as:ATS-401/801
can program ATS-35B directly without jumper playing. And if you has another panel ,we also
can make one small wireless transmitter board to connect with your panel to work with our
siren.
2.Fix siren indoor on the wall or proper place by screw and connect power adaptor.
3.Please note it can be disarmed or armed by the remote controller. If new remote
controller, please user tools to solder the same master code as siren as diagram showed.
4.Alarm mode: First arm this siren by pressing armed button thru the remote controller,
when detectors or sensors are triggered, this siren can directly receive wireless signal
from detectors or sensors and goes off alarm. You can disarm it by pressing disarmed
button, you can press panic button of the remote control to go off alarm. |
|
|
