|
|
| |
|
|
 |
| Wire PIR-88 Instruction |
|
|
 |
|
|
|
|
ALL Instructions |
| |
Adobe Reader |
| |
(1)DESCRIPTION
Adopting advanced digital signal processing technology, Compounding of high precision
passive infrared detector and logical digital circuit design, feature intelligent power save,
auto- temperature compensation, and so on. It emits digital signal to start the control
panel for alarm through detecting human being body infrared heat. Nice looking, Reliable
and fine quality.
(2)SEPECIFICATION
Sensor: particular low noise double construction
Power : DC9V-16V Signal output: closed circuit
Maximum detecting area: wide angle PIR detector-: 8m×110º (refer to illustration)
Working temperature: －10º ～ ＋50º Store temperature: －25º ～ ＋60º
Anti-electromagnetism : >30 v/m, 10MHz-100MHz Anti-white light: >6500 LUX
(3) Installation: (refer to illustration)
a) Mount the bracket and adjust detecting angle After power connected, LED flashes
10 seconds, than after 120 seconds it starts to work
b) If someone enters detecting rang, its red LED flashes 2 seconds and turns off.
c) Please adjust the detecting rang to best position.
(4) Trouble-shooting
a) LED doesnot flash after power connected-----check power installation
b) Responding is slow-----check sensitive mode and jumper pins
c) Detecting distance is short------check height and direction
(5) CAUTION
Install the detector to the proper place where intruder must enter.
Do not face the detector to any area where window, lamp-house, heat thing and so
on.
It is used for indoor, not for outdoor.
Installing height suggested: 1.5~2.5 m
When installing, do not drop down or hit the detector so to avoid the internal infrared
sensor.
Do not touch the sensor lens so to avoid the detecting distance and sensitivity.
Have termly walk test。
|
|
|
