AmericanEnglishGermanРусский   
 
 
Collection
Home About Us Product AgencyWanted ContactUs  
 
 
 
PSTN alarm
Alarm accessories
Repeater-115
Door sensor-11B
Door sensor-11
Door sensor-12
rolling sensor-13
Water sensor-20
Vibration-21
Glass detector-22
Glass/wire-23
Fire call point-24
Wire siren-31
Horn/wire-32
Horn siren-33
Flash siren/wire-34
Solor siren-35T
Strobe light-35
Strobe light-36
Strobe light-37
Horn strobe-38
Bigger siren -39
Big siren-40
Remote control-41
Panic button-51
Gas detector-61A
Smoke detector-62A
Smoke/wire-62W
Smoke detector-62
Gas&valve-72
Heat sensor-66
CO smoke-71
Curtain PIR-82
Outdoor PIR-85
Roof detector-86
PIR motion-87A
PIR motion-87
Wire PIR-88
Pet immune-89
Infrared beams-91
Perimeter beams-92
GSM Alarm
Central Station
GSM IP alarm
3G tracker
DVR & Camera
3G camera alarm
Personal alarm
Welcome OEM
Function Demo
Gas Alarm Demo
Smoke Fire Alarm
PIR detector
Shutter detector
 
Advertising paper-brand
Advertisingpaper(ATS-401)
Advertisingpaper(ATS-501)
Advertisingpaper(ATS-802)
Beams sensor
brochuredownload
 
        Home>>Product
Repeater-115Model product picture
Repeater-115Model product picture
Repeater-115Model product picture

Repeater-115 Instruction
Repeater-115 Instruction

Model: Repeater-115
Name: Wireless signal repeater
Product Catalogue:


Download
 
ALL Instructions
 
  Adobe Reader
 
1.DESCRIPTON
Wireless alarm Repeaters (signal transfer)is adopt MCU and auto-code. It can transfer
 maximum eight different control panels signal. Expend the alarm main unit to detector
 distance 150m.It is wireless type, plus power adaptor to supply DC power. Usually, it can 
be put at the middle of transmitter and receiver to last/ transfer the wireless signal by
 double distance. It can solve the signal receiving problem at some place where signal 
can not be received well. Widely used for factory, store, garage and so on far distance transmit
 
2.SPECIFICATIONS
1)Power Supply:DC12V         
2)Transmit distance:noninterference <500m
3)Wireless Frequency:315/433MHZ
4)Operating Temperature:-25℃~+55℃
 
3.NSTALLATION
1)Connect power,unzip double antenna.
2)Clear code: press code key 3 seconds → LED lights →LED twinkle 9 times → 
LED extinguish → let slip key →Clear code is OK.
3)Code:press code key → LED light →let slip key → Remote control is triggered → 
LED twinkle → LED extinguish → code is OK.
4)According to the above step , we can set eight main unit to work with one
 signal repeater.
4.NOTICES
Be careful while installation, avoid falling off and destroy.








 
 Service  Contact Us  F.A.Q's